Shree Shakti Engineering Gujarat Pvt. Ltd.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

The Pneumatic Internal Line Up Clamp makes pipe welding faster, easier, and a whole lot more accurate. It’s built for tough jobs—think oil and gas pipelines, cross-country projects, petrochemical plants, or wherever you need a rock-solid weld, onshore or offshore. With this clamp, your pipe joints line up perfectly, every time. That means better welds and fewer mistakes.
Here’s how it works: a powerful pneumatic system expands the clamp inside the pipe, centering everything with real precision. Misalignment? Not an issue. Weld defects? Way less likely. And because it’s quick to set up and release, you keep the job moving and productivity stays high. The clamp handles pipes from 8 inches up to 60 inches, and if you need something custom, that’s doable too. It’s built to take a beating—heavy-duty, reliable, ready for rough site conditions.
What makes it stand out?
- Locks pipes in place for clean, accurate welds- Quick clamp and release speeds up your workflow- Durable enough for harsh field conditions- Handles big pipes, no problem- Expands smoothly and applies pressure evenly- Light enough to move, simple to use and maintain- Works with different pipe thicknesses and materials
You’ll see it in action on oil and gas lines, water and sewage systems, refineries, and anywhere you need long, straight runs of pipe.
What’s in it for you?
- Faster welding and better efficiency- No more wasting time on rework—alignment is spot on- Cuts down on manual effort and keeps downtime low- Saves money, especially on big projects
Why pick our clamp? We build them tough and precise, always up to international welding standards. Need something special, like a custom size or remote control? We’ve got you covered, plus we offer backup parts to keep your operation running smooth.

At SSEGPL, we manufacture and supply a comprehensive range of Self  Air Internal Line Up Clamp designed to deliver fast, accurate, and reliable pipe alignment during welding operations in oil & gas and cross-country pipeline projects. Engineered for rugged field conditions, our clamps help reduce fit-up time, improve weld quality, and enhance overall productivity on pipeline spreads.

Our pneumatic internal clamp range includes Non-Self (Pull Type), Self-Propelled, Copper Backup, and Wireless Remote-Controlled models, allowing customers to select the ideal solution based on pipe size, welding method, and site requirements.

Key Features & Advantages

Precise Internal Alignment
SSEGPL Pneumatic Internal Line-Up Clamps ensure accurate alignment of pipe joints during welding, minimizing mismatch and improving weld integrity. Independent front and rear clamping heads lock the clamp securely into position, enabling quick and efficient fit-up.

Multiple Operating Models

• Non-Self Pneumatic Internal Clamp (Pull Type): Ideal for smaller pipe sizes where controlled positioning is required.

• Self-Propelled Pneumatic Clamp: Equipped with a pneumatic motor that travels through the pipe to the next joint, significantly reducing manual effort and cycle time.

• Copper Backup Clamp: Integrated copper backup ring assembly provides consistent internal support for welding, making it suitable for automatic welding applications.

• Wireless Pneumatic Clamp: Advanced wireless remote control allows safe and efficient operation from a distance, improving operator safety and productivity.

Copper Backup for Superior Welding (Optional)
Copper backup shoe and ring assemblies provide uniform internal contact, support molten weld metal, reduce welding defects, and ensure consistent weld quality. The copper backup system operates independently from the clamping mechanism for enhanced control.

Adjustable & Versatile Design
All models are easily adjustable to accommodate various pipe wall thicknesses, and conversion kits are available to adapt the clamp for different pipe sizes, offering excellent flexibility across projects.

Robust Construction & Pipe Protection
Manufactured using high-strength steel components, SSEGPL clamps are built for long service life. Heavy-duty alloy steel wheels are provided as standard, with PU or Nylon wheels available on request to protect internally coated pipes.

Ideal for Pipeline Construction
Suitable for manual and automatic welding, SSEGPL pneumatic internal clamps are widely used in oil & gas pipelines, cross-country pipeline construction, fabrication yards, and EPC projects.

Why Choose SSEGPL Pneumatic Internal Line-Up Clamps?

• Wide range of models: Non-Self, Self-Propelled, Copper Backup & Wireless

• Designed for accurate, repeatable pipe alignment

• Reduced fit-up time and improved weld quality

• Heavy-duty, field-proven construction

• Customization and conversion kits available

• Trusted by pipeline contractors and EPC companies

As one of India’s leading manufacturers of oil & gas pipeline equipment, and an official distributor in the Kingdom of Saudi Arabia (KSA), SSEGPL delivers reliable, export-quality solutions that meet international project requirements.

At SSEGPL, we manufacture and supply a comprehensive range of Internal Pneumatic Pipe Line-Up Clamp designed to deliver fast, accurate, and reliable pipe alignment during welding operations in oil & gas and cross-country pipeline projects. Engineered for rugged field conditions, our clamps help reduce fit-up time, improve weld quality, and enhance overall productivity on pipeline spreads.

Our pneumatic internal clamp range includes Non-Self (Pull Type), Self-Propelled, Copper Backup, and Wireless Remote-Controlled models, allowing customers to select the ideal solution based on pipe size, welding method, and site requirements.

Key Features & Advantages

Precise Internal Alignment
SSEGPL Pneumatic Internal Line-Up Clamps ensure accurate alignment of pipe joints during welding, minimizing mismatch and improving weld integrity. Independent front and rear clamping heads lock the clamp securely into position, enabling quick and efficient fit-up.

Multiple Operating Models

• Non-Self Pneumatic Internal Clamp (Pull Type): Ideal for smaller pipe sizes where controlled positioning is required.

• Self-Propelled Pneumatic Clamp: Equipped with a pneumatic motor that travels through the pipe to the next joint, significantly reducing manual effort and cycle time.

• Copper Backup Clamp: Integrated copper backup ring assembly provides consistent internal support for welding, making it suitable for automatic welding applications.

• Wireless Pneumatic Clamp: Advanced wireless remote control allows safe and efficient operation from a distance, improving operator safety and productivity.

Copper Backup for Superior Welding (Optional)
Copper backup shoe and ring assemblies provide uniform internal contact, support molten weld metal, reduce welding defects, and ensure consistent weld quality. The copper backup system operates independently from the clamping mechanism for enhanced control.

Adjustable & Versatile Design
All models are easily adjustable to accommodate various pipe wall thicknesses, and conversion kits are available to adapt the clamp for different pipe sizes, offering excellent flexibility across projects.

Robust Construction & Pipe Protection
Manufactured using high-strength steel components, SSEGPL clamps are built for long service life. Heavy-duty alloy steel wheels are provided as standard, with PU or Nylon wheels available on request to protect internally coated pipes.

Ideal for Pipeline Construction
Suitable for manual and automatic welding, SSEGPL pneumatic internal clamps are widely used in oil & gas pipelines, cross-country pipeline construction, fabrication yards, and EPC projects.

Why Choose SSEGPL Pneumatic Internal Line-Up Clamps?

• Wide range of models: Non-Self, Self-Propelled, Copper Backup & Wireless

• Designed for accurate, repeatable pipe alignment

• Reduced fit-up time and improved weld quality

• Heavy-duty, field-proven construction

• Customization and conversion kits available

• Trusted by pipeline contractors and EPC companies

As one of India’s leading manufacturers of oil & gas pipeline equipment, and an official distributor in the Kingdom of Saudi Arabia (KSA), SSEGPL delivers reliable, export-quality solutions that meet international project requirements.

At SSEGPL, we manufacture and supply a comprehensive range of Piping Internal Pneumatic Line Up Clamp Pull Type designed to deliver fast, accurate, and reliable pipe alignment during welding operations in oil & gas and cross-country pipeline projects. Engineered for rugged field conditions, our clamps help reduce fit-up time, improve weld quality, and enhance overall productivity on pipeline spreads.

Our pneumatic internal clamp range includes Non-Self (Pull Type), Self-Propelled, Copper Backup, and Wireless Remote-Controlled models, allowing customers to select the ideal solution based on pipe size, welding method, and site requirements.

Key Features & Advantages

Precise Internal Alignment
SSEGPL Pneumatic Internal Line-Up Clamps ensure accurate alignment of pipe joints during welding, minimizing mismatch and improving weld integrity. Independent front and rear clamping heads lock the clamp securely into position, enabling quick and efficient fit-up.

Multiple Operating Models

• Non-Self Pneumatic Internal Clamp (Pull Type): Ideal for smaller pipe sizes where controlled positioning is required.

• Self-Propelled Pneumatic Clamp: Equipped with a pneumatic motor that travels through the pipe to the next joint, significantly reducing manual effort and cycle time.

• Copper Backup Clamp: Integrated copper backup ring assembly provides consistent internal support for welding, making it suitable for automatic welding applications.

• Wireless Pneumatic Clamp: Advanced wireless remote control allows safe and efficient operation from a distance, improving operator safety and productivity.

Copper Backup for Superior Welding (Optional)
Copper backup shoe and ring assemblies provide uniform internal contact, support molten weld metal, reduce welding defects, and ensure consistent weld quality. The copper backup system operates independently from the clamping mechanism for enhanced control.

Adjustable & Versatile Design
All models are easily adjustable to accommodate various pipe wall thicknesses, and conversion kits are available to adapt the clamp for different pipe sizes, offering excellent flexibility across projects.

Robust Construction & Pipe Protection
Manufactured using high-strength steel components, SSEGPL clamps are built for long service life. Heavy-duty alloy steel wheels are provided as standard, with PU or Nylon wheels available on request to protect internally coated pipes.

Ideal for Pipeline Construction
Suitable for manual and automatic welding, SSEGPL pneumatic internal clamps are widely used in oil & gas pipelines, cross-country pipeline construction, fabrication yards, and EPC projects.

Why Choose SSEGPL Pneumatic Internal Line-Up Clamps?

• Wide range of models: Non-Self, Self-Propelled, Copper Backup & Wireless

• Designed for accurate, repeatable pipe alignment

• Reduced fit-up time and improved weld quality

• Heavy-duty, field-proven construction

• Customization and conversion kits available

• Trusted by pipeline contractors and EPC companies

As one of India’s leading manufacturers of oil & gas pipeline equipment, and an official distributor in the Kingdom of Saudi Arabia (KSA), SSEGPL delivers reliable, export-quality solutions that meet international project requirements.

At SSEGPL, our Pipe Fit Up Clamp Ratchet Type is designed for precision, reliability, and durability — making it an ideal choice for pipeline alignment and welding applications in the oil & gas industry. Built with high-grade materials and engineered for rugged field conditions, our clamps ensure perfect alignment for efficient and high-quality welding.

As India’s largest manufacturer of Oil & Gas Pipeline Equipment and a trusted distributor in Saudi Arabia (KSA), we take pride in delivering world-class pipeline alignment tools trusted by professionals worldwide.

⚙️ Product Features

• Accurate Pipe Alignment:
  Ensures perfect end-to-end alignment for welding, minimizing joint gaps and improving weld quality.

• Robust Construction:
  Built with high-strength steel for long-lasting durability and dependable field performance.

• Easy Manual Operation:
  Simple, tool-free design for quick setup and operation without requiring external power.

• Wide Size Range:
  Available for various pipe diameters, suitable for carbon steel, stainless steel, and alloy materials.

• Portable & Lightweight:
  Compact design for easy handling and use in both onshore and offshore environments.

• Low Maintenance:
  Designed for hassle-free operation with minimal servicing requirements.

�� Applications

✔ Pipeline Fabrication
✔ Onshore & Offshore Oil & Gas Projects
✔ Construction & Infrastructure
✔ Petrochemical Plants
✔ Process Industries
✔ Maintenance & Repair Operations

�� Why Choose SSEGPL?

✅ India’s Leading Manufacturer of Oil & Gas Pipeline Equipment
✅ Tailored Solutions – Custom sizes and designs to fit your project needs
✅ Global Presence – Exporting high-quality equipment worldwide
✅ Reliable After-Sales Support – Ensuring long-term performance and satisfaction